Sliding single-leaf manual doors STANDARD

 

The doors of this series are intended for use in hospitals, pharmacy, laboratories and other industries.

The door leaf is made from a "sandwich" panel, aluminum frame, two face sheets and an internal filling of rock wool with density not less than 120 kg/m3. Face sheets (as well as the door frame and upper guide casing) can be made of steel or aluminum painted, with antibacterial PVC, stainless steel and processed with disinfectants that do not contain aggressive components and abrasive materials.

Thanks to two internal sealed high precision ball bearings, a compact upper rail for doors weighing up to 140 kg ensures trouble-free operation (more than 100,000 cycles), has a quiet stroke.

The damper-closer is designed for door leaves with a weight of up to 80 kg. Doors gently stop and self-retracting occupying the final position. On the door with a width of 600 ... 800 mm dampers-closers are installed, that work only for closing or only for opening. On the door with a width of 900 ... 1600 mm, dampers-closers are installed, that work both for closing and opening.

Height of the doorway (mm): Dh = 2100.

Width of the doorway (mm): Dbr =600. . . 1600 (in steps of 100 mm).

Thickness of the door leaf  (mm): 32.

 

 

Semi-hermetic single-leaf manual doors PROFI

 

Doors of this series are intended for use in hospitals, pharmacy, laboratories and other industries where classified rooms with a controlled environment are required.

The door leaf is made in the form of a "sandwich" panel in the frame of aluminum profiles. A rubber seal is installed along the entire height of the front edge of the doors, and along the whole height of the trailing edge there is a ledge. When closed, the seal and protrusion are pressed against the rubber seals installed in the door frame, preventing flow of air between the rooms in the areas of the front and rear edges. In this case, the possibility of air flow between rooms in the upper and lower zones of the door remains.

The "sandwich" panel consists of an aluminum frame, two face sheets, inner filler - rock wool with a density of at least 120 kg/m3. Face sheets can be made of steel or aluminum painted, with antibacterial PVC, stainless steel, HPL-plastic and treated with disinfectants that do not contain aggressive components and abrasive materials.

Height of the doorway (mm): Dh = 2100.

Width of the doorway (mm): Dbr =600. . . 1600 (in steps of 100 mm).

Thickness of the door leaf  (mm): 30.

Right and left opening.

 

 

 

 

Semi-hermetic single-leaf automatic doors PROFI

 

Doors of this series are intended for use in hospitals, pharmacy, laboratories and other industries where classified rooms with a controlled environment are required.

The door leaf is made in the form of a "sandwich" panel in the frame of aluminum profiles. A rubber seal is installed along the entire height of the front edge of the doors, and along the whole height of the trailing edge there is a ledge. When closed, the seal and protrusion are pressed against the rubber seals installed in the door frame, preventing flow of air between the rooms in the areas of the front and rear edges. In this case, the possibility of air flow between rooms in the upper and lower zones of the door remains.

The "sandwich" panel consists of an aluminum frame, two face sheets, inner filler - rock wool with a density of at least 120 kg/m3. Face sheets can be made of steel or aluminum painted, with antibacterial PVC, stainless steel, HPL-plastic and treated with disinfectants that do not contain aggressive components and abrasive materials.

The silent electric drive for closing the doors is designed for a weight of up to 120 kg, it has roller brackets that are self-cleaning, with a self-learning digital control, with the ability to combine with an access control system, individual recognition and recording of faults, protection against network voltage drops, with the possibility of installing an emergency power battery.

Height of the doorway (mm): Dh = 2100.

Width of the doorway (mm): Dbr =600. . . 1600 (in steps of 100 mm).

                                                                             Thickness of the door leaf  (mm): 30.

                                                                             Right and left opening.

  

 

Semi-hermetic double-leaf automatic doors PROFI

 

Doors of this series are intended for use in hospitals, pharmacy, laboratories and other industries where classified rooms with a controlled environment are required.

Both door leaves have the same width and are made in the form of "sandwich" panels in the frame of aluminum profiles. A rubber seal is installed along the entire height of the front edge of the doors, and along the whole height of the trailing edge there is a ledge. When closed, the seal and protrusion are pressed against the rubber seals installed in the door frame, preventing flow of air between the rooms in the areas of the front and rear edges. In this case, the possibility of air flow between rooms in the upper and lower zones of the door remains. The "sandwich" panel consists of an aluminum frame, two face sheets and an inner filling made of rock wool with a density of at least 120 kg/m3.

Face sheets can be made of steel or aluminum painted, with antibacterial PVC, stainless steel, HPL-plastic, and processed with disinfectants that do not contain aggressive components and abrasive materials.

The quiet electric drive for closing the doors is designed for a weight of up to 120 kg, it has roller brackets that self-clean, self-learning digital control with the ability to set up a connection to an access control system, individual          

recognition and fault recording, protection against network voltage drops, the possibility of installing an emergency power battery.

Height of the doorway (mm): Dh = 2100.

Width of the doorway (mm):  Dbr = 1000…2800 (in steps of 200 mm).

Thickness of the door leaf (mm):  30. 

  

 

Hermetic manual doors PROFI

 

герметичные двериHermetic doors of this series are intended for use in hospitals, pharmacy, laboratories and other industries where classified rooms with a controlled environment are required.

The door leaf is made in the form of a "sandwich" panel in the frame of aluminum profiles. A rubber seal is installed along the entire perimeter of the door, which in the closed state is pressed against the door frame and the floor, preventing of air flow between the rooms.

The "sandwich" panel consists of an aluminum frame, two face sheets, inner filler - rock wool with a density of at least 120 kg/m3. Face sheets can be made of steel or aluminum painted, with antibacterial PVC, stainless steel, HPL-plastic and treated with disinfectants that do not contain aggressive components and abrasive materials.

Height of the doorway (mm): Dh = 2100. 

Width of the doorway (mm): D b r = 600…1600 (in steps fo 100 mm)

Thickness of the door leaf (mm):  55.

Right and left opening.

 

 

 

 

Hermetic automatic doors PROFI 

 

Hermetic doors of this series are intended for use in hospitals, pharmacy, laboratories and other industries where classified rooms with a controlled environment are required.

The door leaf is made in the form of a "sandwich" panel in the frame of aluminum profiles. A rubber seal is installed along the entire perimeter of the door, which in the closed state is pressed against the door frame and the floor, preventing of air flow between the rooms.

The "sandwich" panel consists of an aluminum frame, two face sheets, inner filler - rock wool with a density of at least 120 kg/m3. Face sheets can be made of steel or aluminum painted, with antibacterial PVC, stainless steel, HPL-plastic and treated with disinfectants that do not contain aggressive components and abrasive materials.

The reliable and silent electric door closing drive is designed for a weight of up to 200 kg, has self-learning digital control with the ability to set up a connection to an access control system, self-diagnosis and recording of faults, protection against network voltage drops, and the possibility of installing an emergency power battery.

Height of the doorway (mm): Dh = 2100. 

Width of the doorway (mm): D b r = 600…1600 (in steps fo 100 mm)

                                                                              Thickness of the door leaf (mm):  55.

                                                                     Right and left opening.