CEILING SYSTEMS
for clean rooms 

Ceiling for clean rooms

Walk-on ceilinsg and cassette ceilings have a homogeneous smooth and flat surface, which minimizes the possibility of accumulation of contaminants, easy cleaning and disinfection. The materials used in the production of ceiling structures and cassette ceilings are resistant to disinfectant solutions, provide the necessary strength (withstand construction load from equipment up to 150 kg/m2, strength against the excess pressure of at least 250 Pa (for cassette ceilings - no less than 50 Pa ), provide for the possibility of installing luminaires, air distributors, ventilation grids, supply of technological communications and signaling, do not accumulate static electricity.

 

Ceiling structures are mounted in a modular system and can be dismantled at any time to access the ceiling area. Joints and seams between ceiling panels and cassettes can be closed with quick-release seals or sealed with special highly elastic silicone sealants with bactericidal properties.


LPS (PMTS) — economical and convenient in mounting the cassette ceiling.

Construction: The original design of the carrier profile allows quick and easy installation and dismantling of the cassettes. The cassettes are made of galvanized steel 0.7-0.8 mm thick, coated with powder paint RAL 9010. As an option, cassettes can be painted with antibacterial paint. Bearing profile and suspension system are made of galvanized steel.

The cassette ceiling is resistant to excessive or negative pressure in the room not less than ± 50Pa.

 

 

А (mm) х Б (mm) / В (min 150 mm)
300х300 (312х312) 300х600 (312х625) 600х600 (625х625) 600х1200 (625х1250)

5.1.1

5.1.2

5.1.3

5.1.4

 

 

LPH (PMYS-H) — hermetic quick-to-install cassette ceiling.

Construction: A rubber seal is installed in the special groove along the perimeter of the cassette, which guarantees the airtightness of the ceiling. The cassettes are made of galvanized steel with a thickness of 0,7-0,8 mm, coated with powder paint RAL 9010. As an option, the cassettes can be painted with antibacterial paint. Bearing profile and suspension system are made of galvanized steel.

The cassette ceiling is resistant to excessive or negative pressure in the room not less than ± 50Pa.

 

 

А (mm) х Б (mm) / В (min 150 mm)
300х300 (312х312) 300х600 (312х625) 600х600 (625х625) 600х1200 (625х1250)

5.2.1

5.2.2

5.2.3

5.2.4

 

Walk-On Ceilings — hermetic ceilings that withstands a load of up to 150 kg/m, which allows technical personnel to move over the surface of the mounted ceiling when performing work in the technological space over clean rooms.

Construction: made on the basis of Profi panels, consist of external visible parts (steel or  aluminum painted, with antibacterial PVC, stainless steel, HPL-plastic) and an inner part (rock wool of density not less than 100 kg/m and a frame of aluminum profile along the perimeter of the panel). The panel ceiling is resistant to excess or negative pressure in the room not less than ± 250Pa.

 

 

А (100...1220 mm) / Б (100...4500 mm) / В (min 500 mm)
thickness 52 мм thickness 102 мм

5.3.1

5.3.2